Benefits of stainless steel and when to use it for enclosures
 

Benefits of stainless steel and when to use it for enclosures

September 2, 2022by yongubox0

Benefits of stainless stell and when to use it for enclosures

Iron and chromium combine to form stainless steel. However, the exact components and ratios of the steel’s components will vary depending on the grade desired and its intended application. A steel’s desired properties can only be achieved by careful monitoring of the alloy’s chemical composition. Corrosion resistance, high thermal resilience, low-temperature resistance, improved durability, weldability, improved flexibility, and control of magnetism are all frequent reasons for adding other metals and gases to a stainless steel alloy.

 

STAINLESS STEEL GRADES

These are the two grades that are most frequently seen:

  • 304 Stainless Steel

There are several uses for it in the manufacturing industry. Its heavy-duty construction and low price provide exceptional value for your money. Because of this, it’s a favorite among design engineers. The chromium content in 304 stainless steel is 18%, whereas the nickel content is 8%. In most cases, it does not rust; however, in high saline situations, steel does not fair well.
Its capacity to bend without sacrificing its strength is one of the features of this grade. Healthcare facilities, transportation, kitchen utensils, and industrial effluents treatment facilities are just a few of the places where it’s used most frequently.

 

  • 316 Stainless Steel

This stainless steel is of better quality. Chromium (16%), nickel (10%), and molybdenum (2%) make up the rest of the composition. Applications using chemicals or in salty conditions benefit from its enhanced corrosion resistance.
Stainless steel enclosures of grades 304 and 316 can be made with confidence. Which one you should go with is going to be determined by the application for which you’ll be using it. 304 is the most widely utilized grade in the industry right now.
Corrosion resistance, high temperatures, durability, ease of fabrication, and cost are all factors to consider when choosing the stainless steel grade to utilize when creating stainless steel enclosures.
Stainless steel is more expensive than other metals, but its long-term value should not be underestimated. Durability and cheap maintenance expenses make it a superior investment in the long run.

 

ADVANTAGES OF STAINLESS STEEL ENCLOSURES
Abrasion Resistant

The corrosion and abrasion resistance is excellent in stainless steel. Scratches or damage to the surface is quickly repaired thanks to their self-healing properties, which only require oxygen from the air or water to do it. Because of this, stainless steel retains its luster and brilliance over decades of use without the aid of a coating or other corrosion prevention.

 

Low Maintenance

In comparison to aluminum and other metals, stainless steel is more durable.
A basic stainless steel cleaning can be used to maintain the surface regularly.
To keep drop boxes clean, we can use brushed stainless steel as the exterior. You only need a scouring pad to get rid of the vandalism. There is no need for harsh chemical cleaners.

 

Long Lasting

As long as you keep it in good working order, Cabinets can last an eternity. To keep it looking like new, you need to give it a quick shine with a stainless steel cleaner every so often.

 

Recyclable

Stainless Steel is entirely recyclable. The use of stainless steel achieves a reduced carbon footprint. A year’s worth of electricity may be saved by recycling stainless steel, enough to power 18 million homes.

 

Fire Resilient

Stainless steel is known for being resistant to oxidation even at high temperatures. Some grades of stainless steel can be utilized to resist scaling at temperatures higher than 1800 degrees Fahrenheit.

 

Gleaming

Stainless Steel is a beautiful material that may be utilized for a wide range of applications. With a simple stainless steel cleaner, it is possible to achieve a satin or mirror finish.

 

Easy to Fabricate

It may be fashioned into any form, depending on the requirements of the situation, because of its malleable nature. It can be bent without compromising its strength also makes it simple to alter.

 

Resistance to Extreme Temperatures

Relatively high temperatures are required for the majority of manufacturing procedures. Because the electrical components inside the enclosure generate heat, the enclosure itself must be able to offer protection from both the heat generated within and outside of it.

 

Strength

The ratio of stainless steel’s strength to its weight is exceptionally high. Because of this, it is an excellent material for use in enclosures.

 

Environmentally Friendly

The fact that stainless steel can be recycled entirely may come as a surprise to some. The metal typically remains in good shape even at the very end of its extremely long lifespan. It indicates that it can be quickly re-fabricated into a different product. Products made of stainless steel are extremely uncommon to discover in landfills.

 

Aesthetically Pleasing

Enclosures made of stainless steel can blend in flawlessly with any design concerns you may have. Even though their ability to withstand harsh environments is their primary strength, they maintain a pleasing appearance.

 

WHERE ARE STAINLESS STEEL ENCLOSURES USED?

The majority of industrial settings routinely operate in harsh environments. For some, maintaining a high level of cleanliness may be essential, while for others, the ability to tolerate extremely hot or low temperatures may be necessary. Enclosures made of stainless steel shield sensitive electrical equipment from the damaging effects of prolonged exposure to intense radiation. The following are some of the most common applications for these enclosures:

  • Food and beverage manufacturers, distributors, and those involved in food packaging.
  • Oil and gas firms.
  • Companies in the pharmaceutical industry.
  • Businesses that deal with the processing of seafood.
  • Treatment facilities for both waste and water.
  • Power stations and other utilities.

Fabricating stainless steel products to meet the specific requirements of any sector is a very straightforward process.
YONGUBOX  facilitates customization options in dimensions and surface treatment, drilling, and printing in a variety of aluminium enclosures with high-quality stainless steel screws based on customer needs.

 

For further information and customized product of your requirements, follow our Facebook for more details: YONGUBOX.

You can also contact us at +86 13326782625 or write us at salesglobal@yonggu-enclosure.com.

Leave a Reply

Your email address will not be published. Required fields are marked *